Removable terminal plug connection – Vector DA-250DH CU User Manual
Page 12
Cable end treatment
12
Connector connections
Step 1. Loosen the terminal screw, then insert the cable.
Step 2. Retighten the terminal screw. (Pull on the cable to ensure it is securely connected.)
Tip
Recommended slotted screwdriver type: Screwdriver with blade that is 3 mm (0.12") in width
Tightens
Loosens
Terminal screw
Slotted screwdriver
Shielded cable
Removable terminal
plug
1
1
2
Hot
Cold
Earth
Bit shape 3 mm (0.12”)
Cautions
• Be sure to use shielded cables for audio signal lines.
• Avoid soldering cable conductor, as contact resistance may increase when the cable is tightened and the
solder is crushed, possibly resulting in an excessive rise in joint temperatures.
• Use cables of AWG 12 – 24.
Shielded cable
7 mm
(0.28”)
20 mm
(0.79”)
9. REMOVABLE TERMINAL PLUG CONNECTION