Vizio TL-R480T - Manual (Page 25)

TL-R480T Enterprise Broadband Router User Giude
Figure 5-11 Port Mirror
Mirroring Port - The port will collect packet from Mirrored Port(s).
Mirrored Port(s) - Any packets through the Mirrored Port(s) will be copied and be
forwarded to the Mirror Port.
Note:
1) The Mirror port cannot be mirrored.
2) All in the Mirrored Port(s) means all LAN ports except for Mirror Port.
5.5 DHCP
Figure 5-12 the DHCP menu
There are three submenus under the DHCP menu (shown in figure 5-12): DHCP
Settings
, DHCP Clients List and Address Reservation. Click any of them, and you will
be able to configure the corresponding function. The detailed explanations for each
submenu are provided below.
5.5.1 DHCP Settings
The router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server,
which provides the TCP/IP configuration for all the PCs that are connected to the router
on the LAN. The DHCP Server can be configured on the page (shown in figure 5-13):
Figure 5-13 DHCP Settings
- 21 -