Wibur Curtis Company LIGD - Manual (Page 2)

© 2001-2006 Wilbur Curtis Company, Inc. Printed in U.S.A. MAY/06 – 7829 – F-3122 – Rev A
Factory-set grind cycles can be easily changed.
Grind time for each cycle is accurately displayed by the read-
out. To change, simply follow these steps (each button is set
independently):
• Turn the grinder off. Place a brew cone and filter in the
machine.
• Press and hold the grind cycle button. At the same time
press and release the ON/OFF button.
• Now press the grind cycle button again. The display will
indicate its current setting. Immediately following it will
begin grinding. The display will indicate the elapsed time
from zero.
• When the desired level is reached, release the button.*
• Wait until the motor has stopped completely, and press any
OTHER button on the same side. This sets the time and
exits the programming mode.
NOTE: *Add time by pressing and holding the flashing button until the
desired level is reached.
Digital InterLock TM System – Only from Curtis.
Automatic Grinder-to-Brewer Interface
Designed for fresh grind/fresh brew programs, the Curtis
Digital InterLock
TM System connects compatible Digital
Control Coffee Brewers to Digital Control Grinder for simple,
error-proof grinding and brewing.
With the push of a button, the Grinder automatically
conveys the selected grind volume to the brewing system.
The brew selection is then “locked-in” to the corresponding
grind cycle...incorrect cycles are “locked out.” If both brewer
sides are in use, the Grinder’s memory stores the information
and waits until a side is available.
Standard Features
• Dual-Hoppers - Include decaf or a specialty coffee in your
fresh grind/fresh brew program.
• Infinitely Adjustable Grind Settings - From extra coarse to
extra-fine grinding.
• Larger Hopper Capacity than Competitive Models -
Reduces labor costs with less frequent refills.
• Positive Flow Auger - For uninterrupted coffee
dispensing.
• Self-Adjusting Brew Rails - Easily handle large Gemini
brew baskets.
• Wide Match Profile - Brew rails never extend beyond
housing with larger baskets.
• Large Grinding Burrs - Provide faster more efficient
operation.
• Accurate and Consistent Throw - For even distribution,
chaff reduction.
• Uniform Grind
• Powerful 1/2 hp Motor - Equipped with safety circuit
breaker.
• Standard 120VAC Operation
ILGD
INTERLOCK
CABLE
2.1 1.0 13.4
ELECTRICAL
CONNECTION
2.8
14.5
9.7
29.3
10.1
COFFEE FRESH GROUND
SMALL
MEDIUM
LARGE
SMALL
MEDIUM
LARGE ON/OFF
˝ ˝ ˝
˝
˝
˝ ˝
˝
WILBUR CURTIS COMPANY, INC.
6913 Acco Street, Montebello, CA 90640-5403
Telephone: 800-421-6150 · 323-837-2300
Fax: 323-837-2406
www.wilburcurtis.com
SPECIFICATIONS
ILGD
Grind Cycles (Per Side) 3 per side
Hopper Capacity (Whole Beans) 7.5 lbs ea. side
Timer Digital InterLock
Portion Range 1 to 99 Seconds
Dimensions (H x W x D) 29.3” x 10.1” x 14.5”
Voltage 120VAC/60Hz
Power Requirements 8.0A
Motor 1/2 hp
Shipping Weight (lbs.) 60 lbs.
Cube (cu. ft.) 4.6 cu. ft.
FACTORY SETTINGS ILGD GRINDER
Volume/Grind Setting
Large - 15 sec.
Medium - 10 sec.
Small - 5 sec.