Philips HR8566 User Manual

Page 7

Advertising
background image

Nozzles

Convertible nozzle

◗

With the brush strip folded in, the convertible nozzle can be used on carpets (fig. 6).

◗

With the brush strip folded out, the convertible nozzle can be used on hard floors (fig. 7).

Crevice tool, small nozzle and small brush

◗

These accessories can be found in the special storage compartment (fig. 8).

◗

Small nozzle (fig. 9).

◗

Crevice tool (fig. 10).

◗

Small brush (fig. 11).

Using the appliance

Adjusting suction power

1

You can adjust the suction power by means of the slide on the handgrip (fig. 12).

2

You can also adjust the suction power by turning the knob on the vacuum cleaner to the
desired setting (fig. 13).

-

Set the knob to MAX for maximum suction power.

-

Set the knob to MIN for minimal suction power.

Insufficient suction power

Please make sure that:
-

the knob on the vacuum cleaner is in the right position;

-

the slide on the handgrip is closed;

-

the dustbag is not full;

-

the nozzle, tube or hose is not blocked up.

To remove the obstruction, disconnect the blocked-up item and connect it (as far as possible) in
reverse position. Switch the vacuum cleaner on to make the airflow suck the obstructing material
out of the blocked-up item.

Parking the tube

1

Insert the tube clip into the parking slot (fig. 14).

2

This allows you to park the tube in a convenient position in a single movement (fig. 15).

Storage

1

Switch the vacuum cleaner off.

2

Remove the mains plug from the wall socket.

3

Rewind the mains cord by pressing the cord winder button.

4

Put the appliance in upright position and attach the lower tube to the vacuum cleaner by
inserting the tube clip in the slot (fig. 16).

5

You can slide the clip along the tube to adjust its height (fig. 17).

ENGLISH

7

Advertising