4 adding nat services to a profile – Westell Technologies Westell LiteLine 6110 User Manual
Page 80
030-300233 Rev. A
80
May 2006
Westell (Models 6000, 6100, 6110)
User Guide
12.8.4 Adding NAT Services to a Profile
This section explains how to add NAT services to your NAT service profile. Remember, you may attach an unlimited
number of NAT services to your profile.
NOTE: Westell has developed an extensive list of NAT services and you may select any service from this list. By
selecting your specific NAT service and setting up a NAT profile, you will ensure that the appropriate ports on your
Router are open and that the required application traffic can pass through your LAN. For a list of supported NAT
services, see section 16, “NAT Services.”
To add a NAT service to your NAT service profile, select a service from the options provided at the Service Name
drop-down menu. Next, click enable to continue.
NOTE: You can attach multiple NAT services to your profile. However, for each NAT service that you attach to
your profile, you will need to first select the service profile from the Current Profile drop-down menu, and then add
the new NAT service, as explained in this section.