West Bend 643-050 - Manual (Page 4)

4
6. Press the toast lever down until it locks into place. Power light will glow and
toasting cycle will begin. Note: Toaster must be plugged in and serving tray
open for toast lever to lock in place.
7. When selected color is reached, toast rack will open in bottom of toaster and
toast will slide out onto serving tray. Power light and toaster will turn off. After a
few seconds you will hear a click as the toast rack automatically closes. The
toast cycle can be stopped anytime by pressing the cancel button. If toasting
additional food, always allow a few seconds between toasting for toast rack to
close.
8. When finished toasting, unplug the cord from wall outlet and allow toaster to
cool before cleaning. Wipe serving tray to remove crumbs. Close serving tray
when not in use. Wrap cord around clips on underside of toaster for storage.
• A small amount of smoke and/or odor may occur upon heating due to the
release of manufacturing oils – this is normal.
• Some minor expansion/contraction sounds may occur during heating and
cooling – this is normal.
H
ELPFUL
H
INTS
• Toasting can be stopped any time by pressing the cancel button.
• Use bread setting when toasting bread, English muffins, waffles, toaster
pastries, etc., for toasting on both sides.
• Frozen foods may require a darker setting.
• If toasting foods with frosting or icing, place food into toaster with frosting side to
front.
• After toasting, toast may be buttered or spread with your favorite topping while
on serving tray.
• Do not cut on serving tray, as damage to tray will occur.
• Unplug toaster if fire or smoke is observed.
• If food becomes lodged inside toaster, unplug cord from wall outlet and allow
toaster to cool completely. Turn toaster upside down and shake to dislodge.
• Never insert metal fork or other metal objects into toasting slots.
PROBLEM SOLUTION
Toast lever will not lock in place.
Toaster must be plugged in and serving
tray opened for toaster to start.
Food slides through toaster onto serving
tray before toasting.
Toast rack must be closed. Carefully
place food into bread slot, do not drop in.
Toast rack is not closed.
Allow a few seconds for toast rack to
close automatically after toasting. Lift
toast lever up slightly.
Food does not slide onto serving tray.
Uneven or ragged edges can catch on
toast rack, trim off ragged edges before
toasting.
Food is not toasted on both sides. Set bread/bagel select switch to bread.
Crust side of bagel is too dark.
Set bread/bagel select switch to bagel,
place cut side of bagel to front of toaster.