Welch Allyn SCANTEAM 6920 User Manual
Page 15
10
SCANTEAM 6920 User’s Guide
Setting Keystroke Speed to 25, 40, or 60 Characters per Second
Use the same procedure as setting keystroke speed to 80 c/s" to
set the characters per second to 25, 40, or 60. The keystrokes (at
step 4) are:
US2<ENTER> for 25 C/S or
US4<ENTER> for 40 C/S or
US6<ENTER> for 60 C/S.
Setting Keyboard Type to XT
1.
Turn off power to the host PC.
2.
Set MSR DIP switch position 8 to OFF.
3.
Turn on power to the host PC.
4.
Type the following keys: UKX<ENTER>.
5.
Turn off power to the host PC.
6.
Set MSR DIP switch position 8 to ON.
7.
Set MSR DIP switch position 2 to ON.
Note: Step 8 is required for XT keyboard type command (“UKX”) only!
8.
Set MSR DIP switch position 1 to ON.
9.
Reapply power to the host PC.
Setting Keyboard Type to PS/2 models 25/30/70 or AT–PS/2
Use the same procedure (above) to change from AT-PS/2 to
PS/2 models 25/30/70 type keyboards,,or from XT to AT-PS/2.
The keystrokes (at step 4) are:
UKP<ENTER> to change to PS/2 models 25/30/70 or
UKA<ENTER> to change to AT-PS/2.