weber 98583 - Manual (Page 21)

21
Step 22
Complete accessory installation
You will need: work table, accessory rack, warming rack,
three tubing plugs and thermometer.
Set the accessory rack across the bottom braces in front
of the frame connector. Figure 29 (a).
Open the lid and set the warming rack into the slots at the
rear of the cooking box. Figure 29 (b).
Set the work table onto the left side rails and work table
spacer. Figure 29 (c).
Note: Work table should rest between the frame rails and on
the work table spacer installed in “Add Cooking Box” step.
Insert the thermometer into its holder. Figure 29 (d).
Insert the tubing plugs into the ends of the frame. To fully
seat the plugs, you may have to tap them lightly with a
hammer. Figure 29 (e).
Figure 29
(a)
(d)
(b)
(e)
(c)
Work table
Work table spacer