Introduction, Wh-c centre loudspeaker, User instructions: wh2.1 system – Wharfedale WH-C User Manual

Page 3

Advertising
background image

USER INSTRUCTIONS: WH2.1 SYSTEM

Introduction

WH-C Centre Loudspeaker

The Wharfedale WH-C centre speaker is a dedicated centre channel unit designed for mounting
preferably above a TV screen (as show is position A) or below a TV screen (as show in postion B). If
the unit is mounted on top of the television, move it forward so that the front grilles are level with or
slightly in front of the screen. This will reduce reflections from the screen and the top of the cabinet.
The loudspeaker should be located on a stable flat surface to avoid any danger of movement when it is
vibrated by high sound levels.
The speaker is supplied with four self-adhesive feet. Apply one to each bottom corner of the unit before
mounting.
CONNECTION
You will need a single length of twin core cable. Connect the red (+) terminal of the centre unit to the
red (+) terminal of the amplifiers centre channel output. Connect the black (-) terminal of the centre
unit to the corresponding black (-) terminal of the amplifier. The connection panel uses screw terminals
- the drawing below illustrates the connection method.
Leaving a stub of 5mm protruding from the wall. Align the hole in the mounting bracket over the screw head and carefully lower
the unit onto the screw. The speaker should now be securely attached with the feet against the wall. Now connect the speakers to
the amplifier.

Centre Speaker

Positioning

Preparing Speaker Cables

Connecting Speaker Cables

Centre Channel Connections

CENTRE

FRONT

REAR

LEFT

LEFT

RIGHT

RIGHT

Advertising