Whynter AFR-300 - Manual (Page 8)

8
REMOTE CONTROL OPERATION
1. ON/OFF: Turns on / off the air purifier.
2. LOCK: Press the “LOCK” (No. 2) button on remote control to lock the air
purifier. All the buttons on the air purifier and the remote control are disabled
except the “LOCK” button on the remote control. To unlock the air purifier,
press this button again. You can also unplug and restart the air purifier.
2. FAN: Sets fan speed setting in the cycle of High –> Medium –> Low –> Silent.
3. SILENT: Sets the air purifier to run at a noise level below 35 dB to ensure
sound sleep. By pressing this button, this machine will be switched into the
“SILENT” fan mode.
4. SLEEP: Sets running time of the air purifier at SLIENT mode for 8 hours. In the
SLEEP mode, the TIMER function cannot be used.
5. UV Lamp: Turns on / off the photo-catalyst POC function.
6. UV Lamp timer reset: If the UV Lamp is replaced, press the RESET button to
set the timer to zero.
7. HEPA filter timer reset: After the HEPA filter is replaced, press the RESET
button to set the timer to zero.
8. LED: Turns on / off the background LED light.
9. Intentionally removed.
10. TIMER: By pressing “TIME” button once, “88:88” will be displayed, press the
“+” & “-” buttons to set the current time. When the air purifier is turned on,
press the “TIME” button twice quickly, “88:88
time off
” will be displayed, then
press the “+” & “-” buttons to adjust the time off. When the machine is on
Standby mode, press the “TIME” button twice quickly, “88:88
time on
” will be
displayed, then press the “+” & “-” buttons to adjust the activation time
11. ANTI-POLLEN: Turns on the pollen-removing function. This mode of operation
is recommended for pollen season. The fan speed will run in a cycle of
medium speed for 5 minutes and low speed for 5 minutes.