Weider WESY5983.5 - Manual (Page 20)

M10 Nylon Locknut (76) M8 Nylon Locknut (65)
M6 Nylon Locknut (69)
M8 Flange Nut (19)
M8 Washer (59)
M4 Nylon Locknut (69)
M10 Lock Washer (103)
38mm Round Inner Cap (38)
50mm Square Inner Cap (98)
45mm Square Inner Cap (42)
25mm Square Inner Cap (54)
19mm Round Inner Cap (78)
38mm x 64mm Inner Cap (41)
38mm x 76mm Inner Cap (99)
M10 x 95mm Bolt (66)
M10 x 91mm Bolt (90)
M10 x 108mm Bolt (81)
M10 x 42mm Button Head Bolt (71)
M6 x 13mm Screw (92)
1/4” x 45mm Bolt (58)
1/4” x 16mm Bolt (82)
M4 x 16mm Screw (62)
M4 x 19mm Screw (77)
M4 x 12mm Flat
Head Screw (85)
M10 x 25mm Button Head Bolt (87)
M8 x 19mm Button Head Screw (86)
M10 Nut (47)
M10 x 72mm Bolt (64)
M4 x 5mm Screw (104)
M10 x 53mm Carriage Bolt (61)
M10 x 60mm Button Head Bolt (63) M10 x 65mm Button Head Bolt (70)
M10 x 68mm Button Head Bolt (56)
M10 x 66mm Carriage Bolt (83)
M8 x 104mm Bolt (60)
M10 x 102mm Bolt (24)
M10 x 140mm Carriage Bolt (73)
M10 x 113mm Button Head Bolt (40)
M8 x 114mm Axle (57)
?? Washer (84)
M10 Washer (75)
PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST on the reverse side of this page.
Note: Some small
parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.