West Bend 77201 - Manual (Page 5)

To open bottles:
1. Hold top of can opener to stabilize the unit. Open bottles slowly to avoid spilling
contents.
C
LEANING
Y
OUR
E
LECTRIC
C
AN
O
PENER
1. Unplug cord from electrical outlet.
2. To remove the cutting head attachment, press release button.
3. Wash cutting head attachment in warm, soapy water, rinse and dry thoroughly;
or the cutting head attachment may be placed in top rack of dishwasher.
4. Wipe the can opener body and the area behind cutting head attachment with a
damp cloth. Never immerse the can opener in water.
5. To re-assemble, slide the cutting head attachment onto the body until the
release button clicks into place.
To Remove To Re-assemble
E
LECTRIC
C
AN
O
PENER
T
IPS
•
If there is a bump, dent, or heavy seam in the rim of the can, open the other end
of the can or start cutter just beyond the problem area.
• To use the cord storage on the back of the opener, push cord in or out as
needed.
•
If piercing lever does not move freely, remove and clean the cutting head
assembly.
5