Windsor 10080480 - Manual (Page 14)

REMOVE SOLUTION
FILL COVER
OPERATIONS-FILLING THE SOLUTION TANK
86302100 CLIPPER DUO 10/02/07 3-6
ADD CLEANING
CHEMICAL PER
CHEMICAL LABELING
REPLACE SOLUTION
FILL COVER
FILL LINE
STEP 1
STEP 2
STEP 3
STEP 4
OR
ADD WATER
10 Gal.
(38 Lt)
Do not put defoamer, solvents, spotter or
prespray chemicals in the solution tank.
Do not allow water to spill into vacuum motor inlet.
Dry spills from top of solution tank.
Use only the suitable chemicals listed below. Using
incompatible chemicals will damage the machine.
Damages of this type are not covered under warranty.
Carefully read ingredients on manufacturer’s label before
using any product in this machine.
CHEMICALS
Suitable Chemicals
Non-Compatible Chemicals
Alkalis Aldehydes
Detergents Aromatic Hydrocarbons
Hydroxides SP Butyls
Soaps Carbon Tetrachloride
Vinegar Clorox*
Chlorinated Bleaches
Chlorinated Hydrocarbons
Lysol*
Methyl Ethel Ketone (MEK)
Perchorethylene (perc)
Phenolics
Trichlorethylene
D-Limonene