Waring MX1000R - Manual (Page 4)

GROUNDING INSTRUCTIONS
• For your protection, this appliance is equipped with a 3-conductor cord set.
• 120 volt units are supplied with a molded 3-prong grounding-type plug
(NEMA 5-15P) and should be used in combination with a properly connected
grounding-type outlet as shown in Figure 1.
If a grounding-type outlet is not available, an adapter, shown in Figure 2,
may be utilized to enable a 2-slot wall outlet to be used with a 3-prong plug,
except in Canada and Europe. Referring to Figure 3, the adapter must be
grounded by attaching its grounding lug under the screw of the outlet cover
plate.
Caution: Before using an adapter, it must be determined that the outlet cover
plate screw is properly grounded. If in doubt, consult a licensed electrician.
Never use an adapter unless you are sure it is properly grounded.
Note: Use of an adapter is not permitted in Canada and Europe.
Green/Yellow: Earth Ground. Blue: Neutral. Brown: Live.
Note: User installed cord set plugs are not permitted in Europe.
MX1000R (Model: MXMPBKP6) OPERATION
1. Before starting, make sure that the blender is unplugged.
2. With the unit in OFF position, place container on blender base. Be sure
container is fully seated and that drive coupling is properly engaged. Plug
blender cord into outlet.
3. Put ingredients into container and cover it with
container lid. Do not fill above MAX line.
4. This blender has 2 speed settings: HI and LOW.
Press Paddle Switch to desired position. To crush
ice quickly, use HI speed setting.
5. When finished blending, set paddle switch to OFF
position.
6. This blender is equipped with a PULSE option. Hold paddle switch in
down position to engage PULSE function. Unit will run on HI speed until
the paddle switch is released.