User maintenance instructions, Health tip, Cleaning the dirt filter – Westinghouse WST1800 User Manual

Page 5: Important

Advertising
background image

4

Health Tip

If you suffer from allergies or asthma, take the
Collection Bin outdoors to empty. As you empty
the dirt into the trash can, gently tap the
Collection Bin against the side of the can to
remove loose debris.

Cleaning The Dirt Filter

To maintain optimal performance, the Dirt Filter
will need cleaning whenever the suction is not
strong. The Dirt Filter must be clean and free of
elements which might hinder the flow of air.

1. Remove the Collection Bin and the Lid from

the unit. Locate the Dirt Filter inside the
Collection Bin.

2. Remove the Dirt Filter by pulling straight up

and off Filtered Air Inlet. (See Figure 4.)
Rinse under running water to clean.

IMPORTANT!

Dry thoroughly before use.

3. Slide the Dirt Filter over the Filtered Air Inlet

and re-attach.

IMPORTANT!

NEVER OPERATE THE

SWEEPEZE™ WITHOUT THE DIRT FILTER

PROPERLY IN PLACE.

1. To empty the SweepEZE Collection Bin, turn the

Control Dial to the OFF position.

2. Pull the Collection Bin outward from the front

of the Bin Cavity. Grasp the Collection Bin Grip
firmly and lift it out and away from the
SweepEZE™ Main Unit.

3. Holding the Collection Bin firmly with one

hand, grasp the Collection Bin Lid Handle with
the other hand and pull the the Lid
straight up and out to remove.

4. Turn the Collection Bin upside down over

a trash can. Make sure you empty all dirt and
debris from inside and below the Bin. To ensure
that all the dirt spills out, tap the side of the
Collection Bin gently against the edge of the
trash can. Re-attach the Collection Bin Lid to
the top of the Collection Bin.

5. Clean Sensors, Dirt Inlet area and Collection

Bin Cavity with a damp rag or towel.

6. Insert the assembled Collection Bin with Lid

fitted snugly into position bottom-first into the
Collection Bin Storage Cavity at the front of the
SweepEZE™

. The 2 grooves in the bottom of the

Bin fit easily over the rod in the front of the
unit. Grasp the Collection Bin Grip and lock the
Collection Bin back into position.

USER MAINTENANCE INSTRUCTIONS

Collection
Bin Grip

Dirt Inlet

Main Unit

Collection Bin
Lid Handle

Collection Bin
Cavity

Filtered Air Inlet

Dirt Filter

Figure 3

Figure 4

Advertising