Whirlpool FGS337G - Manual (Page 23)

23
Cleaning the surface burners
• You should routinely remove and clean the burner
cap. Always clean the burner cap after a spill-
over. Keeping the burner cap clean prevents
improper ignition and an uneven flame.
• For the proper flow of gas and ignition of the
burner, do not allow spills, food, cleaning
agents, or any other material to enter the gas
tube opening.
• Gas must flow freely through the gas tube
opening for the burner to light properly. You must
keep this area free of any soil and protect it from
boilovers or spillovers. Always keep the burner
cap in place whenever a surface burner is in use.
• Let the cooktop cool before cleaning.
• Do not use oven cleaners, bleach, or rust
removers.
• Do not obstruct the flow of combustion and
ventilation air.
• Be careful not to allow moisture to collect in the
control areas. Moisture can cause the ignitor
switches to fail.
Gas tube
opening
Burner
base
S
EALED SURFACE BURNERS AND COOKTOP
Contoured
well area
Ignitor
• Occasionally check the burner flames for proper
size and shape as
shown. A good flame
is blue in color. If the
flames are uneven,
you may need to
clean the burners.
Porcelain
burner cap
CARING FOR YOUR RANGE
5
8
"