Whirlpool Compactor User Manual
Page 8
8
Trimless panel with handle
Dimensions
Use these dimension drawings to create a custom panel for use
without a trim kit. The panel should be
¹⁄₂ in. to ⁵⁄₈ in. (13 mm to
16 mm) thick.
NOTE: A thicker panel may need rounded front corners and a
cut-out for access to the handle.
Installation
1. Remove foot pedal, toe guard, and decorative panel.
2. Align the top of the custom panel with the bottom of the
handle.
3. Secure the panel from the back using 4 – #8 x 1 in. wood
screws as shown.
4. Reinstall the toe guard using the existing screws and
¹⁄₂ in.
washer. Then, reinstall the foot pedal.
Trimless panel without handle
Dimensions
Use these dimension drawings to create a custom panel for use
without a trim kit. The panel should be
¹⁄₂ in. (13 mm) min. thick.
Installation
1. Remove foot pedal, toe guard, decorative panel, and handle.
2. Align the bottom of the custom panel with the bottom of the
drawer front.
3. Secure the panel from the back using 4 – #8 x 1 in. wood
screws as shown.
4. Attach a 15 in. x
¹⁄₂ in. quarter-round filler along the top of the
drawer front using glue or screws.
5. Reinstall the toe guard using the existing screws and
¹⁄₂ in.
washer. Then, reinstall the foot pedal.
1. Handle
2. Custom Panel
3. #8 x 1” Wood Screws
4. Toe Guard
5. Washer
6. Toe Guard Screw
23
13
/
16
"
(60.5 cm)
15"
(38.1 cm)
1
2
4
3
5
6
3
1. Custom Panel
2. 15” x
¹⁄₂ ” Quarter-round
3. #8 x 1” Wood Screws
4. Toe Guard
5. Washer
6. Toe Guard Screw
25"
(63.5 cm)
15"
(38.1 cm)
1
2
4
5
6
3
3