Westinghouse W31501 - Manual (Page 15)

Getting to Know Your LCD Display
10
2.8 Built-in Speakers
The LCD display comes with a pair of built-in stereo speakers located at the
front of the unit.
2.9 Connecting the AC Power Adapter
You must use the 100-240 VAC/60W power adapter that is included with
the LCD display.
Caution:
• Make sure you have read and understood the safety notes
before connecting the LCD display to the power adapter and
electrical outlet.
• Do not use any other AC power adapter except the adapter that
was included with your LCD display.
• Contact your dealer if you need a replacement adapter.
1 Connect the power cord to
the AC adapter.
2
Plug the power cord into an
electrical outlet. Contact your
dealer or a qualified service
technician if the plug does
not fit into the outlet.
3 Insert the small end of the
adapter cord into the DC-in
connector at the back of the
LCD display. The power
LED on the front panel glows
orange.
Power
AC 100~240V
nextgen-nt1503.book Page 10 Thursday, December 25, 2003 4:42 PM