weber 1200 - Manual (Page 9)

Two 10-24 1 3⁄4 inch machine screws
Two 10-24 hex nuts
Two hinge pins
(hardware size: 1/4 x 1 1/2 inch clevis pin)
(actual size)
Five 1/4-20 x 2 inch bolts
(actual size)
1/4-20 x 1 1/4 inch bolt
(actual size)
Six 1/4-20 x 1/2 inch bolts
(actual size)
1/4-20 hex nut
(actual size)
Two plastic buttons
(actual size)
1/4-20 keps nut
Two 1/4-20 wing nuts
(actual size)
Eighteen 1/4 inch nylon washers
Two hair pin cotters
Two wheel hubcaps
Spacer bracket
Left hand slide bar assembly
Assembly consists of :
Left hand slide bar
Support rod
Slide
Check contents of hardware packs
Three burner control knobs
Three tool holders
Five tubing plugs
(two are spares)
Swing table end bracket
Two Phillips screws/washers
9