Westinghouse LTV-30w2 - Manual (Page 13)

11
Englis
h
4. Connect power cables
Connect the power cord to the LCD TV then to a properly grounded AC outlet.
5. Turn Power On
Press the Power ON button on the front of the LCD TV, or press the Power ON (Red)
button on the remote control.
6. Select input source for LCD TV using the OSD menu or remote
control
7. If connecting to Antenna, Cable or other RF source on TV Inputs:
See page 17 to configure and allow the LCD TV to receive all available channels.
8. If connecting to a PC (RGB/DVI):
For the best picture quality, set LCD TV timing mode to VESA 1280x768 at 60Hz (refer
to the graphic card’s user guide for questions on how to set this timing mode).