Safety rules, Warning – Weed Eater 545186731 User Manual

Page 2

Advertising
background image

2

SAFETY RULES

WARNING:

When using gardening

appliances, basic safety precautions must al-

ways be followed to reduce the risk of fire and

serious injury. Read and follow all instructions.

This power unit can be dangerous! Operator

is responsible for following instructions and

warnings on unit and in manual. Read entire

instruction manual before using unit! Be thor-

oughly familiar with the controls and the prop-

er use of the unit. Restrict the use of this unit

to persons who have read, understand and

will follow the instructions and warnings on

the unit and in the manual. Never allow chil-

dren to operate this unit.

SAFETY INFORMATION

ON THE UNIT

INSTRUCTION

MANUAL

OPERATOR SAFETY

S

Dress properly.

Always wear safety

glasses or similar eye protection when op-

erating, or performing maintenance on your

unit (safety glasses are available). Eye

protection should be marked Z87.

S

Always wear face or dust mask if operation

is dusty.

S

Always wear heavy, long pants, long

sleeves, boots, and gloves. Do not go bare-

foot or wear sandals.

S

Secure hair above shoulder length.

Se-

cure or remove loose clothing or clothing

with loosely hanging ties, straps, tassels,

etc. They can be caught in moving parts.

S

Being fully covered also helps protect you

from debris and pieces of toxic plants

thrown by spinning blade.

S

Stay alert. Do not operate when you are

tired, ill, upset, or under the influence of al-

cohol, drugs, or medication. Watch what

you are doing; use common sense.

S

Wear hearing protection.

S

Never start or run inside a closed room,

building or other unventilated area. Breath-

ing exhaust fumes can kill.

S

Keep handles free of oil and fuel.

S

Always use the handle.

S

Keep hands and feet away from cutting

area.

S

Do not attempt to remove cut material nor

hold material to be cut when engine is run-

ning or when cutting member is moving.

S

Make sure spark plug is disconnected

when cleaning jammed material from cut-

ting member.

S

Never direct discharge of material toward

bystanders nor allow anyone near the area

of operation. Use care in directing dis-

charge to avoid glass enclosures, automo-

biles, and the like.

S

Don’t overreach or stand on unstable sup-

port. Keep good footing and balance at all

times.

UNIT SAFETY

S

Inspect entire unit before each use. Re-

place damaged parts. Check for fuel leaks.

Make sure all fasteners are in place and se-

curely fastened.

S

Maintain the unit according to recom-

mended procedures.

S

Throw away blades that are bent, warped,

cracked, broken, or damaged in any other

way. Replace parts that are cracked,

chipped, or damaged before using the unit.

S

Use only recommended WEED EATER

parts and accessories. Never use wire,

wire rope, string, flailing devices, etc.

S

Disconnect the spark plug before performing

maintenance except carburetor adjustments.

S

Be sure the blade stops turning when the

engine idles (see CARBURETOR AD-

JUSTMENTS).

S

Remove the blade before making carbure-

tor adjustments. Hold the unit by hand. Do

not make carburetor adjustments from the

blade side of the unit.

S

Keep others away when making carburetor

adjustments.

S

Never start the unit with the gearbox re-

moved. The clutch can fly off and cause se-

rious injury.

S

Have all maintenance and service not ex-

plained in this manual performed by an

authorized service dealer.

EDGING SAFETY

WARNING:

Inspect the area to be

edged before each use. Remove objects

(rocks, broken glass, nails, wire, string, etc.)

which can be thrown by the blade or can wrap

around the shaft.
S

Keep others including children, animals,

bystanders, and helpers at least 50 feet (15

meters) away. Stop the unit immediately if

you are approached.

S

Hold the unit firmly with both hands.

S

Keep firm footing and balance. Do not over-

reach or stand on unstable support.

S

Do not attempt to remove cut material nor

hold material to be cut when the engine is

running or when cutting member is moving.

S

Always keep the wheels and skid in contact

with the ground.

S

Keep all parts of your body away from the

blade and muffler.

S

Always push the unit slowly over the

ground. Stay alert for uneven sidewalks,

holes in the terrain, large roots, etc.

S

Use only for jobs explained in this manual.

Advertising