weber 89839 - Manual (Page 13)

WWW.WEBER.COM ®
13
(1)
(2)
(3)
(1)
(2)
PROBLEM CHECK CURE
Side Burner burns with a yellow or
orange flame, in conjunction with the
smell of gas. Inspect side burner orifice alignment
(Position of orifice to side burner tube.) Loosen orifice and re-align orifice parallel to the side burner tube (3).
(See Section “Side Burner Maintenance”)
Side Burner does not light. Is gas supply off? Turn supply on.
Flame is low in “HI” position Is the fuel hose bent or kinked? Straighten hose.
Push button ignition does not work. Does burner light with a match? If match lights burner, check igniter (see below).
If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web
site. Log onto www.weber.com
® .
SIDE BURNER MAINTENANCE
ƽ WARNING: All gas controls and supply valves should be in
the “OFF” position.
Make sure black wire is connected between the igniter and electrode.
Make sure white wire is connected between the igniter and grounding clip.
Spark should be a white/blue color, not yellow.
1) Igniter Wire
2) Ground wire
3) Burner
Side Burner Grate
Head Retention Clip
Side Burner Ring & Head
Igniter Electrode
Control Knob
Igniter Button
SIDEBURNER TROUBLESHOOTING
ƽ WARNING: The side burner orifice
(4) must be parallel to the side
burner tube opening (5).
(4)
(5)