Wachsmuth & Krogmann MIQ-FE-65 - Manual (Page 7)

LIST OF MAIN PARTS
1. Rocker Switch for Laser
Guide
2. On/Off Trigger Switch
3. Locking Button
4. Dust Output /Vacuum
Adapter
5. Hex Key Storage
6. Cutting Mode Selector
7. Guide Plate
8. Safety Guard
9.
Laser Guide
10. Laser Battery
Compartment
TECHNICAL SPECIFICATIONS:
Item Number 5926-06
Model Number MIQ-FE-65
Rating Voltage 120 VAC
Frequency 60Hz
Amp 5.5A
No load speed
500~3000/SPM
Gross Weight 5 lbs.
Cutting depth
Capacities
Wood Max. 2 3/8
inch. (60mm)
Steel Max 3/16
inch. (5mm)
Cutting Angles 45 Degrees Left
90 Degrees
45 Degrees Right
Laser Specifications:
Class II Laser Product
Rating Voltage
3 VDC
Average Power <1.0Mw
Wave Length 650nm
Battery Type AAA
Number of Batteries 2
CONTENTS OF PACKAGING
Check all loose parts from the box with the list below. Assemble according to the
instructions on the following pages.
a. Jig Saw w/Laser
b. Wood Cutting blade
c. Vacuum Adapter
d. 2 AAA 1.5v Batteries (already in Laser Battery Compartment)
e. Hex Key (all ready in Hex Key Storage)
f. Instruction Manual
If any of the above items are missing, please contact our service department at 1-888-
367-7373 (http://www.wk-usa.com) for replacement. Business hours Mon-Fri 9:00am-
4:00 p.m Ct.
6