Wolf ICBWWD30 - Manual (Page 9)

9
I N S TA L L AT I O N I N S T R U C T I O N S
Installation with Built-In Oven and Microwave – Stainless Steel Drawer Front
O P T I O N A L I N S T A L L A T I O N S
The Wolf warming drawer with stainless steel
drawer front may be installed in combination
with a 762 mm single oven and microwave
oven with 762 mm trim, provided the warming
drawer is fully enclosed, top and bottom. Refer
to the illustration below. Also refer to installa-
tion instructions provided with the built-in
oven and microwave for additional specifica-
tions. Dimensions will vary according to the
specific installation.
The warming drawer platform must be able to
support 91 kg. It must be a minimum of 25 mm
above the toe kick to allow for the overlap of
the warming drawer trim.
The Wolf warming drawer with stainless steel
drawer front may be installed next to or above
another Wolf warming drawer, provided each
unit is fully enclosed, top and bottom.
Installation with Built-In Oven – Stainless Steel
Drawer Front
S TA I N L E S S S T E E L D R A W E R F R O N T