Weider WEBE09100 - Manual (Page 5)

5
Part Identification Chart
10mm Spacer (20)–1
M10 x 65mm Bolt (23)–3
M8 Nylon Locknut (9)–1
M10 x 58mm Carriage Bolt (8)–2
M8 x 58mm Bolt (16)–1
M6 Washer (30)–4
M6 x 16mm Screw (3)–6
M10 x 180mm Bolt (22)–1
M8 Flat Washer (13)–2
M10 Washer (6)–4
M10 Nylon Locknut (11)–8
M10 x 22mm Bolt (7)–2
M6 x 64mm Screw (4)–4
Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each
drawing is the key number of the part, from the Part List in the center of this manual. The number following the
key number is the quantity needed for assembly.
Note: Some small parts may have been pre-attached. If a
part is not in the parts bag, check to see if it has been pre-attached.