Weider WEBE34110 User Manual
Page 13
Advertising
13
25
38
60
60
25. Wet the ends of the Lat Bar (38) with a small
amount of soapy water. Slide the Handgrips (60)
onto the ends of the Lat Bar.
26.
Make sure all parts of the weight bench are properly tightened. In addition, pull each cable a few
times to make sure the cables move smoothly over the pulleys. If the cables do not move smoothly,
locate and correct the problem. When weights are used, the cables may be damaged if they are
incorrectly routed.
The use of all remaining parts will be explained in ADJUSTMENTS, beginning on page 14.
Advertising