Troubleshooting suggestions – Wells COUNTERTOP WARMERS SW-10T User Manual

Page 10

Advertising
background image

TROUBLESHOOTING SUGGESTIONS

8

SYMPTOM

POSSIBLE CAUSE

SUGGESTED REMEDY

No power to warmer

Circuit breaker off or tripped

Reset circuit breaker

Unit not plugged in

Make sure unit is plugged in to
power receptacle

Warmer will not heat

Temperature control not set

Set control to desired
temperature

Internal damage

Contact you Authorized Wells
Service Agency for repairs

Warmer trips circuit breaker

Pan leaking or other internal
damage

Contact your Authorized Wells
Service Agency for repairs

Internal damage

Contact your Authorized Wells
Service Agency for repairs

Mineral deposits on pan acting
as a insulator

Clean pan(s) with delime cleaner

Connected to wrong voltage

Verify supply voltage - must
match voltage on warmer
nameplate

Too much water

Remove water from pan until 1”
of water remains in pan

Warmer slow to heat

There are no user-serviceable components in this appliance.
In all instances of damage or malfunction, contact your Authorized Wells Service Agency for repairs.

001 p

/n 3
03305

O
p

M

anual CT

W
a

rm
ers / Thermosta

t C
ontrol

Advertising
This manual is related to the following products: