weber 3100 - Manual (Page 9)

Two wheel hubcaps
(actual size)
Two hinge pins
(hardware size: 1/4 x 1 1/2 inch clevis pin)
(actual size)
Five 1/4-20 x 2 inch bolts
(actual size)
Six 1/4-20 x 1/2 inch bolts
(actual size)
Two 10-24 x 1 3/4 machine screws
(actual size)
Two 10-24 hex nuts
(actual size)
Fifteen 1/4 inch nylon washers
(actual size)
1/4-20 keps nut
Two hair pin cotters
Swing table end bracket
Catch pan holder
Manifold bracket
Side burner assembly
Burner grate
Side burner knob
Two side burner lock
Note: The locks are
taped to the inside of
the side burner lid.
Check contents of hardware packs
Three burner control knobs
Three tool holders
Five tubing plugs
(two are spares)
9
Two Phillips screws/washers