weber 500 User Manual
Page 24
Figure 11
24
24
View from behind
cooking box
Wing nuts
Figure 10
Guide screw
Crossover tube
Figure 12
Figure 9
d) Unlatch the Spider Stopper Guards and remove.
Figure 9.
h) To reinstall the burners, reverse steps c) through g).
g) Lift and twist the burner assembly slightly, to separate
the crossover tube from the burners. Figure 12.
Remove the burners from the cooking box.
f)
Slide the burner assembly out from under the guide
screw and washer in the corners of the cooking box.
Figure 11.
e) Remove the manifold bracket and unscrew the two
wing nuts that hold the manifold to the cooking box.
Pull the manifold and valve assembly out of the
burners and carefully set it down. Figure 10.
ƽ
CAUTION: The burner openings must be positioned
properly over the valve orifices. Figure 13a.
Check proper assembly before fastening manifold in
place. Figure 13b.
Figure 13
Valve
Burner
(a)
(b)