Whirlpool LXR9245EQ0 - Manual (Page 6)

6
5. Turn the Load Size Selector to the
setting that corresponds with the size
of your wash load and the type of
fabric being washed.
• The Load Size Selector is a rotary
knob. Your washer has five load size
settings
• To change the load size setting after
the washer has started to fill, turn the
Selector to the desired new setting.
6. Select a wash-rinse temperature with
the Water Temperature Selector. Match
the water temperatures with the type
of fabric and soils being washed.
• See page 14 for water temperature
guidelines.
7. (OPTIONAL STEP) If desired, set the
Extra Rinse Selector to On for an
additional rinse and spin to the end of
the wash cycle.
8. Push in the Cycle Control Knob and
turn it clockwise to the wash cycle you
want. See pages 7 and 8.
9. Pull out the Cycle Control Knob to
start the washer.
Extra
Small
Extra
Large
Small
Medium
Large
Load Size
Temperature
Hot
Cold
Warm
Warm
Wash
Rinse
Warm
Cold
Cold
Cold
Extra Rinse
Off On
O P E R A T I N G Y O U R W A S H E R