Weider WESY19510 - Manual (Page 13)

24. Attach the Long Cable (23) to the Small “U”-
Bracket (67) with a 1/4” Nylon Locknut (2) and a
1/4” Flat Washer (10). See the inset drawing.
Do not overtighten the Nylon Locknut; it
should be threaded onto the end of the Cable
only a couple of turns, as shown.
Attach the Small “U”-Bracket (67) to the Weight
Tube (63) with the 5/16” x 1 3/4” Bolt (72) and a
5/16” Nylon Locknut (3).
24
63
72
67
3
10
2
23
13
23
67
2
25. Attach the Backrest (41) to the Front Upright (42)
with two 1/4” x 2 1/2” Screws (43) and two 1/4”
Flat Washers (10).
Seat Assembly 25
41
42
10 43