Waterford Appliances Free Standing Refrigerator - Manual (Page 10)

To remove shelves:
Hold the right side of the shelf, Lift the left side with
your left hand about 45
o and pull the shelf towards
you. When removing the shelves, start by remov-
ing the top one.
To replace shelves:
Put the shelf in at an angel about 45 o (same as
removing shelf), align the right projections in the
grooves located at the side of the refrigerator cham-
ber and lower the left side of the shelf to fit the pro-
jections in the left hand side grooves. When replac-
ing the shelves back in the refrigerator chamber,
start with the bottom one.
Bottle Shelves
The bottle shelves are suitable for both large and
small bottles and are removed/put back from/in the
refrigerator chamber the same way as the glass
shelves.
Vegetable Drawers
The two drawers at the bottom of the refrigerator
chamber are designed to store fruit and vegetables.
The glass shelf covering the drawers maintains
humidity thus preventing stored food from drying
out.
Door Storage Shelves
The shelves in the door can hold bottles of up to 2
litres. They can be moved and placed throughout
the entire height of the door.
Storage Boxes
The storage boxes are ideal for all items of food.
The tight fitting lids prevent drying out. They can be
placed in the refrigerator or in the storage box hold-
er on the door. The storage boxes are made of
material which is not affected by oils, fats or weak
acids.
0-4 Container
0-4 [ o C] container has been designed to allow last-
ing storage of food with no detriment to their nutri-
tional values, aroma and appearance. Proper
humidity is maintained in the container. The food is
protected against the temperature fluctuations
caused by repeated door opening and is easily
accessible.
0-4 [
o C] container can be removed if extra regular
storage space is required.
9
Fig.3
Fig.3a
USING THE REFRIGERATOR
The refrigerator has been setup with a default tem-
perature of + 5
o C for optimum operation. It is pos-
sible to change and save the setting in the electron-
ic control memory (see temperature setting sec-
tion). The latest temperature setting will be kept in
memory in case of a power failure.
The electronic control has been equipped with the
following functions:
* ON/OFF switch function.
* Display of the real temperature inside the refrig-
erator chamber.
* Setting temperature in the refrigerator chamber.
* Quick cooling
* Cooling fan
* Adjustment of the display contrast.
* Alarms and error codes.
* Visual indication of functions by the use of
LED’s.
Before using for the first time, clean the inside of the
appliance and the drawers with warm water and a
little washing up liquid and dry with a soft cloth.
Before connecting to the mains, let the appliance
stand for at least 2 hours to ensure correct function-
ing.