Whistler 1780 - Manual (Page 10)

Teach/Tutorial Mode
Provides simulated alerts for each type of signal.
• Press City and (Quiet) simultaneously and release.
Display reads:
Quiet mode can also be accessed while Teach/Tutorial
mode is engaged.
• Press (Power/Play) to exit.
Memo Mode
Record up to nine distinct message tracks for a total of 90
seconds, one 90 second message or any combination in
between.
IMPORTANT: Unit does not detect radar or laser signals
during recording or while playing a memo.
WARNING!!! Memo mode is not intended to be used
while you are driving. You should not use any device in a
vehicle that may distract you from observing the road
ahead.
To record or play a message (Memo mode):
• Press memo button and release. The unit will beep once;
this enters Memo mode. Display reads:
TEACH
PLAY
RECORD
MEMO
OPERATION OPERATION
• Press and release the (Quiet/Record) button to begin
a recording. Note: Recording starts as soon as the button
is released. Display reads:
REC = record, 1 = track #, 8 = time remaining
If the recording time expires for a track, the unit will auto-
matically switch to the next track. Press and release
(Quiet/Record) again to stop recording. The unit will
automatically stop recording once track 9 is completed.
To play a message:
• Enter Memo mode and press (Power/Play) to listen to
recorded messages.
• To play a selected track, press (Volume Up) or
(Volume Down) button until selected track appears on
the display. Display reads:
PLY = play, 1 = track #, 8 = time remaining
• Press the (Power/Play) button.
Messages are kept in memory and are not affected by
resetting the factory features. See “Reset Features” sec-
tion of the manual.
To delete a message:
• Enter Memo mode and press (Volume Up) or
(Volume Down) button until selected track appears on
the display.
• Press the (Quiet/Record) button twice.
REC1 8
PLY1 8
16 17
1780 10/4/00 9:26 AM Page 19