Installation of optionalmodules – Whistler PRO-3600 User Manual

Page 10

Advertising
background image

Voice Module Installation
The Voice Module provides audio for all aspects of modes,
alerts and GPS features.
To install:

Make sure “Voice On” is enabled in Option Mode
(default setting). (See Option Mode in owner’s manual.)

For maximum volume, find a convenient location close
to the driver’s ear, such as the trim panel between A & B
pillars. Attach speaker using the supplied clip.

Run the cable from the location selected to the iBox, so
that it doesn’t interfere with normal driving operation.

Plug the cable into the VOICE Port on the iBox. The
volume is controlled by the knob on Voice Module.

NOTE: This is the only audio option that can be plugged into
the Pro-3600. Any other device may damage the unit and void
the warranty.

Optional Rear Laser/Radar Module
For drivers interested in gaining increased detection from
behind, the Pro-3600 can be upgraded with a second
laser/radar antenna. This antenna is mounted in the back of
the vehicle facing rearward and can be purchased from many
Whistler retailers or directly from Whistler; ask for the Part
Number SWRA-36.

The Pro-3600 iBox is designed to operate with an additional
laser/radar receiver; the RADAR2 port is the input for the
optional laser/radar receiver. An asterisk is displayed next to
the Band ID when laser/radar signals are detected from this
module. Must turn RADAR2 on in Option Mode.

INSTALLATION OF OPTIONALMODULES

INSTALLATION OF OPTIONALMODULES

17

18

Optional GPS Module
The optional GPS module is required to utilize several of the
Pro-3600 GPS based features.
These features are:

• Vehicle Speed
• Compass Heading
• Compass Direction Voice Prompts
• Digital Clock
• Red Light/Speed Camera location warnings
• Speed selectable Quiet and Filter modes
• User set speed limit warning
• Trip Time and distance.

Mounting Guidelines

• Unit needs a clear view of the sky above.
• Some windshields have an Instaclear™ or Electriclear™

type coating, that can affect GPS signals. Consult the
vehicle’s dealer or the owner’s manual supplied with the
vehicle to determine if the windshield has this coating.

To install:

Select a location on the dash or center console so
that it doesn’t interfere with normal driving operation.
(remember the unit needs to be able to “see” the sky).

GPS module has a magnetic base to make installation
easy – simply place on a metal area.

Must turn GPS on in Option Mode.

Advertising