Westinghouse LCM-17W7 - Manual (Page 10)

9
OSD Menu Functions
All the function settings for the LCD monitor are controlled using the control keys located on
the bottom part of the front panel. To display the OSD main menu, press the “Menu” button.
(Note: The OSD menu display will disappear automatically, if no action is taken.)
The LCD monitor has been adjusted to optimal settings before shipment. Adjustments to the
monitor settings can be made using the OSD menu.
Press the “Menu” button to display the OSD menu.
Press the “ ” or “ “ button to select the function to be adjusted.
Press the “INPUT/OK” button to enter the OSD sub-menu to be adjusted.
Press the “ ” or “ “ keypad button to change the setting of the function.
To exit the OSD menu or go back to the previous action, press the “MENU” button. It
automatically will save any changes that have been made.
Repeat the steps above to change the setting of other functions. The following is a list of the
OSD sub-menus to adjust the screen display settings for analog and digital signal sources.