Whynter FM-65G - Manual (Page 7)

7
1. When the freezer is plugged in to a
power outlet, press the “Set” button.
The LED will display the factory pre-set temperature of 0°F
2. To adjust the temperature:
a. Press the “Set” button again
b. While the LED is flashing, press the
“▲” or “▼” buttons to reach the
desired temperature
c. Once the desired temperature is set, the LED stops flashing. The
current internal temperature will then be displayed. After the LED
has stopped flashing, you can check the set temperature by
pressing the set button again
d. To change the preset temperature again repeat steps a., b. and c.
Note: Do not use the refrigerator-freezer as a refrigerator when the ambient
temperature is lower than 41°F
Press the “FF” button to run the freezer on the “Fast Freeze” mode. The Fast
Freeze mode rapidly cools the unit to -8°F. The freezer will then maintain this
temperature.
Note:
Do not run the unit on “FF” (fast freeze) for more than four hours, as this
might adversely affect the refrigeration system.

Fresh foods should not be stored together with frozen foods.

When the temperature is set below 32°F, do not keep glass-bottled drinks
such as beer and lemonade, as the glass might shatter.
Temperature Adjustment
Food Storing
Fast Freeze Mode