Wachsmuth & Krogmann MW5798 - Manual (Page 7)

SELF TEST MODE
The Tevion Charger can perform a self test to check if the charger
is fully functional. When a “beep” sound is heard, the charger is
ready to be used.
1. Remove all batteries and unplug the jack plug from charger.
2. Connect the AC/DC adaptor to the wall electric socket.
3. Push the DISCHARGE button and hold it down, and then
insert the jack plug into the charger. Release the DISCHARGE
button, and the LEDs will light up as follows:
Power Discharge Charge Ready Discharge Charge Read
y
Sound
Test Start
Mode
○ ○ ○ ○ ○ ○ ○
Compartm
ent 1
○ ○ ☆
Compartm
ent 2
○ ☆ ○
Ready
Mode
○ ※ ※
Discharge
Mode
○ ○ ○
Test
Finish
Mode
○ ○ ○ ○ ○ ○ ○
○ LED light
☆ LED blink for 5 times
※ LED light once and blink 3 times
Beeper sound once
4. If the LEDs do not light accordingly, the battery charger is not
fully functional.
- 6 -