White Outdoor 960-969 - Manual (Page 21)

21
SECTION 9: SERVICE
WARNING: Always stop engine and disconnect spark plug wire before cleaning, lubricating or doing
any kind of work on the lawn mower.
Figure 11
Blade Control
Lubricate the pivot points on the blade control handle and the brake cable at least once a season with light oil. See
Figure 11. The blade control must operate freely in both directions.
Wheels
Lubricate the wheel at least once a season with light oil (or engine oil). Also, if the wheels are removed for any
reason, lubricate the surface of the axle bolt and the inner surface of the wheel with light oil. See Figure 11.
Caster Assembly (960-969 Only)
Grease fittings are provided for easy lubrication of the swivel pins located on the front caster assembly.
Engine
Follow engine manual for lubrication instructions.
SECTION 10: OFF-SEASON STORAGE
The following steps should be taken to prepare lawn mower for storage.
• Clean and lubricate mower thoroughly as described in the lubrication instructions.
• We do not recommend the use of pressure washers or garden hose to clean your unit. They may cause damage
to electric components, spindles, pulleys, bearings or the engine. The use of water will result in shortened life
and reduce serviceability.
• Refer to engine manual for correct engine storage instructions.
• Coat mower’s cutting blade with chassis grease to prevent rusting.
• Follow battery storage instructions on 16 (Electric Start Units Only).
• Store mower in a dry, clean area. Do not store next to corrosive materials, such as fertilizer.
NOTE: When storing any type of power equipment in an unventilated or metal storage shed, care should be taken to
rust-proof the equipment. Using a light oil or silicone, coat the equipment, especially cables and all moving parts.
SEE ENGINE MANUAL
LUBRICATE
Wheels
Caster Assembly
Blade Control
Handle