Westinghouse L2046NV - Manual (Page 10)

Installation
1. Attaching the Base Stand to the LCD Monitor
Attach the base stand to the LCD monitor stand neck by aligning the holes and tabs.
Press in and snap the base into place. To remove the base stand, press the tabs on the
bottom of the stand neck and remove the base.
2. Connect Video Cables to a Computer
Connect one of the following into the back of the LCD Monitor:
IMPORTANT: Before beginning, make sure the monitor and computer are
turned off.
DVI-D CONNECTION: Connect a Digital DVI cable from your computer to the LCD
Monitor DVI-D port.
VGA CONNECTION: Connect an analog VGA cable from your computer VGA OUT
port to the LCD Monitor D-SUB port.
9