Installation – Wintal PVR10 User Manual
Page 11
11
2. InStallatIon
Before you turn on your PVR10HD, please connect your TV and other devices first.
If you wish to watch and record two channels simultaneously you will need to make sure that you have
connected the LOOP OUT 1 output with the ANT IN 2 input using the supplied cross over RF cable!
2.1 connectIng to your tv
There are four ways to connect the PVR10HD to your TV.
2.1.1 tV CoNNECtIoN - hdMI
HDMI offers the best quality connection between your TV and PVR using a single digital cable to transmit audio
and video.
RF CABLE
HDMI CABLE
Power Supply
Use cross over
RF cable to
connect Loop Out
1 and ANT IN 2
▪
Use an RF cable to connect the TV antenna to the
ANt IN 1
input on the PVR10HD.
▪
Using an HDMI lead, connect one end to the
hdMI
output on the PVR10HD and the other end to the HDMI
input on your TV.
▪
Switch to the HDMI source on your TV (refer to your TV manual if needed)