Service, Storage, Need assistance – Weed Eater 530086692 User Manual

Page 7

Advertising
background image

-- 7 --

CHECK MUFFLER MOUNTING

SCREWS

Once each year, ensure muffler mounting

screws are secure and tightened properly to

prevent damage.

Cap Screws

Mounting

Screw Holes

Muffler Cover

NOTE:

The muffler mounting screws are lo-

cated behind the cap screws.

The cap

screws must be removed to access the

mounting screws.
S

Remove muffler cover.

S

Loosen and remove the 2 cap screws from

the muffler mounting screw holes.

S

Tighten the 2 mounting screws (100 in/lbs).

S

Reinstall and tighten the 2 cap screws (100

in/lbs).

S

Reinstall muffler cover.

INSPECT MUFFLER AND SPARK

ARRESTING SCREEN

WARNING:

The muffler on this prod-

uct contains chemicals known to the State of

California to cause cancer.

As the unit is used, carbon deposits build up

on the muffler and spark arresting screen,

and must be removed to avoid creating a fire

hazard or affecting engine performance.

TOP VIEW OF MUFFLER

Exhaust

Diverter

Screws

Replace the spark arresting screen every 50

hours of operation or if any damage or breaks

in the screen are noted.

NOTE:

Do not attempt to clean the spark ar-

resting screen.

S

Remove muffler cover.

S

Loosen and remove both screws from the

exhaust diverter.

S

Remove the exhaust diverter and spark ar-

resting screen.

S

Install new spark arresting screen.

S

Reinstall exhaust diverter and both screws.

Tighten screws securely.

S

Reinstall muffler cover.

NOTE:

If any part of the muffler is cracked,

broken or damaged, we recommend that the

muffler be replaced.

SERVICE

We recommend all service and adjustments

not listed in this manual be performed by an

authorized service dealer.

CARBURETOR ADJUSTMENTS

Your carburetor is equipped with limiter caps.

Adjusting the carburetor is a complicated

task. We recommend that you take your unit

to an an authorized service dealer. Damage

will occur if you turn the needles beyond the

limiter stops.

STORAGE

WARNING:

Perform the following

steps after each use:

S

Allow engine to cool, and secure the unit

before storing or transporting.

S

Store unit and fuel in a well ventilated area

where fuel vapors cannot reach sparks or

open flames from water heaters, electric

motors or switches, furnaces, etc.

S

Store unit with all guards in place. Position

unit so that any sharp object cannot acci-

dentally cause injury.

S

Store unit and fuel well out of the reach of

children.

NEED ASSISTANCE?

NEED ASSISTANCE?

Call: 1-800-554-6723.

NEED A SERVICE PART?

Contact your dealer.

Advertising
This manual is related to the following products: