Weider WESY49200 - Manual (Page 10)

10
15. See the inset drawing. Attach the Military
Press Arm (84) to the Pivot Arm (101) with
two 5/16Ó x 2 1/4Ó Bolts (33) and two 5/16Ó
Nylon Locknuts (3).
Press two 1 1/2Ó Square Inner Caps (32) into
the Military Press Arm (84). Press two 1Ó
Round Inner Caps (49) into the Military Press
Arm.
Attach the Pivot Arm (101) to the Assist
Upright (74) with a 3/8Ó x 3 1/4Ó Bolt (67) and
a 3/8Ó Nylon Locknut (21).
16. Press two 1Ó x 2Ó Inner Caps (107) into the
Assist Arm (105).
Attach the Assist Arm (105) to the Leg Press
Upright (56) with a 3/8Ó x 6Ó Bolt (106), two
3/8Ó Flat Washers (9), and a 3/8Ó Nylon
Locknut (21). See the inset drawing. The
Assist Arm must be attached to the lowest
hole in the Leg Press Upright (56). The
Assist Arm must also be below the welded
bracket on the Assist Upright (74).
15
49
32
84
84
101
101
21
67
56 74
33
3
ARM ASSEMBL
Y
32
16
107 106
105
105
Bracket
56
56
21
9
9
74
74