Weider 831.150380 - Manual (Page 13)

13
ATTACHING THE LAT BAR TO THE HIGH PULLEY
STATION
Attach the Lat Bar (31) to the Cable (10) with a Cable
Clip (34).
WARNING: Always sit on the backrest when using
the high pulley station. The backrest must be in the
level position (see ADJUSTING THE BACKREST on
page 12).
LOCKING THE BARBELL
To change weights while your barbell (not included) is
on the Uprights (42, 43), secure your barbell with the
Barbell Lock Pins (17, 46). This will reduce the possibili-
ty of the barbell tipping while you change weights.
Place the same amount of weight on both ends of
the barbell.
STORING THE WEIGHT BENCH
The WEIDER PRO 335 weight bench is designed to be
folded into a compact storage position when it is not in
use.
First remove the Adjustment Tube (37). Lay the
Backrest (36) on the Bench Frame (33).
Fold the Bench Frame (33) up, as shown in the inset
drawing. Fold down the Front Leg (20). Set the
Adjustment Tube (37) into the upper adjustment brack-
ets to hold the Bench Frame in place.
10
31
34
Barbell
43
42
17
46
37
36
33
33
20
37