Walker PERFAERATORTM PA6685 - Manual (Page 22)

ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker ® replacement parts. Effective Date 02-06-08
20
CONTROL LINKAGE
Control Linkage
1 5850-3 Handle Grip, Foam (3-1/4) 1
2 6684 Transport Lever 1
(Includes Item # 1)
3 6684-1 Transport Lever End 1
4 6684-3 Release Latch 1
5 6684-4 Link, Lever Latch 1
6 7222 Extension Spring (1/4 x 3) 1
7 5281-2 Clevis Pin (5/16 x 7/8) 2
8 6684-5 Actuator Link 2
9 5830 Grease Fitting 9
10 6686-5 Actuator Cross Shaft Assembly 1
11 6686-3 Actuator Cross Shaft Mount 2
12 5214-2 Ball Joint (5/16-24) Nylon Lined 8
13 6686 Transport Pivot Tie Rod 4
14 6685-8 Cam Alignment Plate 12
15 6685-7 Grease, Almagard #3752 *
16 6685-5 Machined Cam 12
17 6681-8 Cam Bearing 12
18 6685-4 Tine Casting 12
19 6684-2 Pivot, Transport Lever 1
(Includes Items # 9 & 20)
20 8788 Rubber Bumper (Self-Adhesive Mount) 1
Tine Crank Assembly Components
21 6685-6 Cartridge Bearing 3
22 6681-2 Tine Crank Shaft 1
23 6685-2 Tine Crank Sprocket 1
(Includes Items # F171 & F231)
24 6686-6 Retractor Plate, LH 1
25 6686-1 Retractor Plate Lift Bracket, LH 2
26 6685-15 Spacer, Short 3
27 6685-9 Hanger Rod 4
28 6685-16 Hanger Rod Bearing W/Bushing 4
29 6681-15 Actuator Block 1
30 6686-4 Retractor Plate Lift Bracket, RH 2
31 6686-7 Retractor Plate, RH 1
32 6681 Tine Crank Assembly **
(Includes Items # 23, 25 & 30)
33 6681-1 Perfaerator Tip 12
6681-7 Solid Spike Tine Tip **
Fasteners
F005 1/4-20 ESNA Nut 6
F007 5/16-18 Jam Nut 8
F009 5/16-18 Whiz Locknut 2
F010 5/16-24 ESNA Nut 8
F013 3/8-16 Whiz Locknut 6
F020 5/16-18 ESNA Nut 4
F023 10-24 ESNA Nut 2
F038 3/8-16 x 1 Hex Bolt 4
F050 1/4 SAE Washer 4
F054 AN960616 Washer 2
F093 5/16-18 x 1 Hex Bolt 6
F103 10-24 x 2 PTHMS 2
F111 1/8 x 3/4 Cotter Pin 3
F116 1/4-20 x 1-1/4 Hex Bolt 4
F171 5/16-18 x 3/8 Set Screw 2
F211 1/4-20 x 7/8 Hex Bolt 2
F261 AN960616L Washer 2
F312 3/8 x 3/8 Shoulder Bolt 2
F404 5/8-18 Jam Nut 8
F417 3/8-16 x 1-1/4 Carriage Bolt 2
F460 1/4 x 1 Woodruff Key 1
* Grease every eight (8) hours using Almagard #3752 lubricant
(Walker P/N 6685-7).
** Service Part Only.