High amp, Heavy duty dc power switch, Remote dc power switch – Western Telematic Net Reach RPC-4840N User Manual
Page 2: Rpc-4840n
5 Sterling
•
Irvine
•
California 92618-2517
•
Toll Free (800) 854-7226
•
•
© Copyright 2009 Western Telematic, Incorporated
RPC4840N-090605
High Amp
Remote DC Power Switch
For More Information:
Call:
Or Visit:
(800) 854-7226
5 Year Warranty
Stocked for Same Day Shipments
In-House Design & Manufacturing
Made In USA
Intelligent Power Control
The RPC can communicate over any TCP/IP network
using standard Telnet, or out-of-band using an external
modem and basic VT100 type terminal emulation. Each
outlet can be assigned an individual password, device
name, reboot delay time and unique power-up default
state.
Easy to Configure, Easy to Use
The RPC can be configured via network, via modem or
locally via the console port. Simple, user-friendly menus
are used to assign a location and circuit names, set
system parameters and view unit status. Circuits can be
switched On, Off, rebooted or set to user-defined default
status using either plug numbers or names.
Reliability and Support
The RPC-4840N is built in the USA and backed by a
five year factory warranty. WTI products are installed in
thousands of network sites world wide. Our customers
know they can depend on superior quality and reliability
for their most mission-critical operations.
Power Input/Output:
Voltage:
-48V DC
DC Inputs:
Two (2) Bus A & B
Connector:
Block (2) #8 Screws
Load:
40 Amps Each Bus
Circuit Module:
40 amp On/Off, Push/Pull Circuit Breaker
Modem and Console Port Interface:
Connector:
DB9M, RS232C, DTE
Coding:
Serial ASCII, 8 bits, No Parity
Network Interface:
Connector:
10Base-T, RJ45
Physical / Environmental:
LED Indicators:
ON, RDY, RXD, Outlet ON (1- 2)
Size:
3.5” x 19” x 7.5” (H x W x D)
(8.8 cm x 48.3 cm x 19.1 cm)
(2RU)
Weight:
10 Lbs. Shipping Weight
Operating
Temperature:
32°F to 122°F
Humidity:
10 - 90% RH, Non-Condensing
Ordering Information:
RPC-4840N
High Amp DC Network Power Switch