Sea t assembl y – Weider WESY39200 User Manual

Page 20

Advertising
background image

20

SEA

T ASSEMBL

Y

44. Remove the adhesive backing from the CLUB WEIDER

¨

16.4ST decal and apply it to the Front Upright (42)

under the ÒWEIDERÓ nameplate as shown.

45. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in

HOW TO USE THE HOME GYM SYSTEM, beginning on page 21 of this manual.

Before using the home gym system, pull each cable a few times to be sure that the cables move smoothly
over the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If
the cables are not properly installed, they may be damaged when heavy weight is used. See the
CABLE DIAGRAMS on page 25 and 26 of this manual for proper cable routing. If there is any slack
in the cables, you will need to remove it by tightening the cables. See TROUBLE-SHOOTING AND
MAINTENANCE on page 24.

44

42

PRO 9400

Decal

42

Advertising