Wacom Cintiq 18SX - Manual (Page 22)

20
LCD Display Cabling Diagram
Cintiq, rear view
Digital/Analog (DVI/VGA)
switch
Analog Digital
DC Input
Video card
DVI or VGA
Do not attach the USB or
serial data cable until
instructed to do so.
DVI-I connector
To connect to a DVI-D connector,
use the DVI-D to DVI-I adaptor.
To connect to a VGA connector,
use the VGA to DVI-I adaptor.
Rear panel of your computer
Power Supply To AC Outlet
CAUTION Make sure that you correctly set the Cintiq Digital/Analog (DVI/VGA) switch for
the video card you are using.
Do not connect or disconnect the video or power cables while Cintiq or your
computer are turned on – this can damage the LCD display or computer video card.
Do not exceed a display refresh rate of 75 Hz—this can overheat the LCD display and
cause permanent damage.
A
B
C
D