Wind Crest WSL547 - Manual

Copyright 2006 Wind Crest by CNP Industries 1
Install Quick Specs are for planning purposes only. Please refer to the detailed installation instructions, prior to
making any cutouts
.
Wall Mounted Hoods – Install Quick Specs
WSL Series Hoods - 27” Depth
Installation Type & Discharge Direction
Wall – vertical discharge
Discharge Size off Hood Top
14” x 4 ¼” rectangular
Discharge Transition – purchased
separately
See “Ventilation” section for options
Standard Features
• 304 Series, 18 gauge stainless steel
• Halogen lighting (dual 50 watt lamps 30” to
48” widths/four 50 watt lamps 54” or
greater widths) with Hi/Lo setting
• Commercial-grade, high luster stainless
steel baffle filters
• All Stainless Steel Finish Hoods can be
installed Indoors or Outdoors (see
Installation Instructions)
• Widths: 30” to 60” in 6” increments
Finishes
• Stainless Steel (S)
• Stainless Steel with Polished Chrome
Accents (SPC)
Optional Upgrades
• 250 Watt Heat Lamp Fixtures (add “H” to
hood model number) e.g. WSL304SH
• 6” or 12” Canopy Extensions in matching
finish (Model(s): 6CE30S or 12CE30S for
30” wide hood in stainless steel finish).
NOTE: Specify desired canopy height,
width and finish when ordering.
• Chrome or Brass Rolled Pot Rails
(Model(s): ACCBRC or ACCBRB) – indoor
use only
• Stainless Steel Back Splash with drop-
down chrome racks supports a maximum
of 30 lbs. (BS plus width – e.g. BS30)
Hood Carton Weight:
WSL307 = 73 lbs. WSL487 = 100 lbs.
WSL367 = 81 lbs. WSL547 = 110 lbs.
WSL427 = 88 lbs. WSL607 = 120 lbs .
Wiring Access
27
"
18"
12
"
3"
30, 3
6, 4
2"
12
"
18"
27
"
48, 5
4, 6
0"
3"
Knockouts For
Dual Blowers
Wiring Access
14"
1"
4-1
/4"
= width
of hood
13"
WSL Hoods
“BS” Warming Shelf Accessory with Chrome Racks
UL UL
LISTED 7Z66 C