Part identification chart – Weider WEBE13011 User Manual
Page 5
Advertising
5
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST on page 14 of this manual. Note: Some small parts may
have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.
PART IDENTIFICATION CHART
M10 x 62mm Bolt (16)
M10 x 40mm Bolt (21)
M10 x 19mm Bolt (22)
M10 x 68mm Bolt (23)
M10 Nylon Locknut (19)
M10 Washer (18)
Advertising