Weslo 925925 - Manual (Page 5)

5
ASSEMBLY
Before beginning assembly, carefully read the
following information and instructions:
¥ Assembly requires two people.
¥ Place all parts in a cleared area and remove the
packing materials; do not dispose of the packing
materials until assembly is completed.
¥ As you assemble the treadmill, be sure that all
parts are oriented as shown in the drawings.
The following tools (not included) are required
for assembly:
¥ Two (2) adjustable wrenches
¥ One (1) phillips screwdriver
Assembly will be more convenient if you have the
following tools: A socket set, a set of open-end or
closed-end wrenches, or a set of ratchet wrenches.
1. With the help of a second person, carefully lay the
treadmill on its side. Position one of the Base Legs
(55) on one of the Uprights (37) as shown. Make
sure that the Base Leg Pads (31) and the Front
Wheel (34) are in the indicated positions. Attach the
Base Leg with two Base Leg Bolts (28), two Base
Leg Washers (29), and two Base Leg Nuts (30).
With the help of a second person, carefully turn the
treadmill onto its other side. Attach the other Base
Leg (55) as described above.
With the help of a second person, carefully raise the
treadmill to the upright position so that both Base
Legs (55) are resting flat on the floor.
2. Hold the treadmill firmly with both hands and lower
the treadmill to the floor. To decrease the possibili-
ty of injury, bend your legs and keep your back
straight.
2
1
28
29
31
55
34
37
30